News and Events

March 18, 2013

Triad RF moves to a larger facility. Although our overhead will increase slightly, the efficiencies gained will provide greater savings. The new address is 180 Tices Lane, Building A, Suite 107, East Brunswick, NJ 08816. Our new office phone number is 1-(855) 558-1001.

March 8, 2013

Triad RF receives an order for a 100W S-Band amplifier housed in a 19 inch rack. The unit will be linear in order to meet stringent phase noise and SNR requirements. This unit will be used in NASA’s TDRSS program.

FEBRUARY 27, 2013

Triad RF receives a development order for Ku-Band amplifiers used for high performance data/video links. These amplifiers will push the envelope in size, efficiency, and linearity. They will also have several integrated protection circuits to insure reliability and quality. Production is expected near the end of 2013.

FEBRUARY 8, 2013

Triad RF received an order from the Indian Space Research Organization (ISRO), whose facilities are grouped under ISRO Telemetry, Tracking and Command Network (ISTRAC). These S-Band amplifiers will provide 100 Watts peak power, are IP67 rated, and operate over a wide ambient operating temperature range. These units also feature communication over TCP/IP; a Triad-developed custom GUI enables remote monitoring and control of the amplifier from any Windows PC. These interfaces will further enhance Triad’s suite of technologies in our product lines which will be made available to all of our customers.

FEBRUARY 4, 2013

Triad RF ships an order for a TA1007 in under a week due to our off-the-shelf stock that we maintain on all of our standard products. This allowed the end user to complete their high power tests in the small time-frame allotted to their test team. Triad RF is committed to be able to quickly respond to customer needs in order to meet most “need by yesterday” requirements.

FEBRUARY 1, 2013

Triad RF receives an order from an unmanned aerial vehicle customer for several TTRM1004's. The high power, compact size and efficient operation at 2.4 GHz module allowed the customer to increase their signal strength to the UAV without added complexity to their system. Future orders are expected in the second half of 2013 upon successful demonstrations.

JANUARY 30, 2013

Triad RF receives an order from a major technical university for the TA1003, our wideband, 30 MHz to 3 GHz, 8 Watt module. This unit will have 40 dB of linear gain across the band, and incorporate our VDS^TM technology. The units will be used in a variety of tests in wireless environments, such as interference, and connectivity issues. The unit’s wideband allowed the customer to perform all of the tests with one model.

JANUARY 21, 2013

Triad RF received an order from an international customer for several high power bi-directional amplifiers needed for an Unmanned Aerial Vehicle (UAV) application. The unit will operate between 2.3 and 2.5 GHz and produce 50W of linear power in transmit mode. Delivery will be in 2nd Quarter of 2013.

JANUARY 15, 2013

Triad RF receives an order from an international customer for our TTRM1010 bi-directional amplifier. The units will ship with our VDS^TM technology and be optimized in the 1.3 GHz band. The customer was very impressed with the units bandwidth, DC capability and efficiency. The units will be used in an Unmanned Ground Vehicle (UGV) to increase the distance the robot can operate from the transmitter. Further orders are expected in 2013.

JANUARY 3, 2013

Triad RF receives orders for wide frequency laboratory units. These units will operate from frequencies ranging from 20 MHz to 1 GHz with output powers as high as 20W. They will be shipped with integrated AC power supplies along with built-in fans to keep the modules at a consistent temperature. These are the first units of a large line of laboratory amplifiers to further complement our product depth.

DECEMBER 26, 2012

Triad RF receives a production order for the TA1025. Delieveries will be spread across the first quarter of 2013 with continued orders expected through 2014. The customer noted the consistency in performance of this model allowed them to provide stable, extended coverage of their transmitters to the end user.

DECEMBER 10, 2012

Triad RF receives an R&D order to develop/manufacture a custom controller module used to operate the locking mechanisms in a state-of-the-art container system that will be deployed in New York City and then if successful, other cities around the U.S. Triad’s solution utilizes a micro-controller plus custom circuits that provide control through CAT-5 cables or over WiFi communication. This technology will be implemented in several future products giving customers remote capabilities throughout our product lines.

NOVEMBER 1, 2012

Triad RF receives an order for more TA1007 modules operating at 2.2 GHz for data communications. We received this order due to our abiltiy to deliver in a very short time span plus meet the customer's cost goals. Our low overhead and agile production methods allowed us to meet these requirements. Further orders are expected in 2013.

OCTOBER 19, 2012

Triad RF receives a development order for a 6.4-7.5 GHz, 10 W COFDM amplifier. This unit will incorporate our VDS^TM technology and accept +9 to +33 VDC from the user. The RF line-up will integrate the latest GaAs and GaN devices to produce the linear RF power over the wide frequency band while using minimal DC power therefore maintaining a high efficiency. The unit will also be one of the smallest in the industry, measuring only 6.0 x 2.5 x 1.06 inches. Production will occur in 2013.

OCTOBER 10, 2012

Triad RF receives a prototype order for small, highly linear, wideband amplifiers from a leading manufacturer of high quality video products. Our innovative linear design will integrate directly into the customer's transmitters and produce higher power with less interference allowing the signal to travel further. Triad RF won the job due to its commitment to customer service and the ability to react quickly to the customer needs. Production is expected in Q1 2013.

SEPTEMBER 5, 2012

Triad RF recently signed PAT Associates to represent them in the southeast region of the
United States. PAT is a manufacturers’ representative with offices throughout the southeast including Alabama, Georgia, Mississippi, Florida, North Carolina, South Carolina, and
Tennessee. They bring a full sales and administrative staff to sell Triad's full product line of RF/Microwave amplifiers, subsystems and systems. For more information about PAT Associates, please visit their website http://www.triteksolutions.com/pat-associates/about.asp/

AUGUST 30, 2012

Triad RF receives an engineering order for state of the art ultra wideband 4W Bi-Directional Amplifiers (BDAs). These units will operate from 20 MHz to 3000 MHz and will transmit around 4 Watts with 25% efficiency on the transmit side, and will produce 20 dB of linear gain on the receive side. The units will be the first to incorporate our proprietary Versatile DC Supply (VDS^TM) technology which allows the PA to be operated with a variety of DC supplies, military BT & BB series batteries, and other batteries where the voltage may change over the discharge cycle. The small increase in the height of the amplifier is significantly less than the traditional approach of using a PA with a separate off the shelf DC/DC converter. Production orders could occur in 2013. “Due to the combination of our ability to push the envelope with new RF devices, along with solid partnerships with our local contract manufacturers, vendors and sales representatives, Triad is achieving strong sales during the start-up stage of the company.” stated Steve Barthelmes, Director at Triad RF.

AUGUST 25, 2012

Triad RF recently signed Aztec Enterprises to represent them in Colorado, Arizona, Utah and New Mexico. Aztec has sales engineers and offices in all four states. They bring a full sales and administrative staff to sell Triad's full product line of RF/Microwave amplifiers, subsystems and systems. For more information about Aztec Enterprises, please visit their website http://www.triteksolutions.com/aztec-enterprises/about.asp/

AUGUST 1, 2012

Triad RF recently signed Tritek Solutions to represent them in Northern and Southern California and Nevada. Tritek is a manufacturers’ representative with offices in both Northern and Southern California. They bring a full sales and administrative staff to sell Triad's full product line of RF/Microwave amplifiers, subsystems and systems. For more information about Tritek Solutions, please visit their website http://www.triteksolutions.com/tritek-solutions/about.asp/

JULY 19, 2012

Triad RF recently signed CFM to represent them in New England. With over 15 years of RF/Microwave component and test equipment sales experience, CFM brings numerous
solid customer relationships and product requirements to Triad RF. We look forward to
working with them through-out the New England territory.

JULY 1, 2012

Triad RF recently signed Advanced Technical Marketing, a full solutions Tier 1
Manufacturer's Representative company. This means that they can supply test hardware,
in addition to software and system integration. They bring over 150 years of RF sales
experience and will represent Triad in the NY/NJ/PA Metro area, and the Mid-Atlantic
states. For more information about ATM, visit http://www.atm1.com/

JUNE 7, 2012

Triad receives order for wideband amplifiers that will be used in a homeland security 
system.  Prototype quantities will be delivered in the third quarter this year, with a small production run expected by the fourth quarter.

APRIL 23, 2012

Triad receives order for low noise 6 GHz front end modules. Unit will be used for Homeland Security scanning. LRIP will begin mid-year 2012 with production starting in early 2013.